Pat-Jet Easy-Access compressed air cleaned filters

The Pat-Jet Easy- Access filter our most sold type of filter. These robust, compact and low-maintenance filters are used for the filtration of many different types of dust: a selection of these can be seen on our page about supplied dedusting systems – where usually a Pat-Jet compressed air cleaned filter is used.

All Pat-Jet filters are continuously cleaned cartridge filters, by compressed air blasts. The filter cartridges are placed vertically for optimal filtration and cleaning.

The Easy-Access model is specially designed to make maintenance and replacement of filter cartridges easier and safer. The filter cartridges can be removed sideways through a large inspection door or panel. A perfect combination of the advantages of vertically placed filter cartridges and horizontal replacement.

No special tools are required to change the filter cartridges. A complete filter change can be done quickly and safely within a few minutes. No other components need to be removed.

Below you can find more information about the different types of Pat-Jet filters we produce.
Also, in the menu on the left you can find more information about the different configurations and options that are possible to customize a Pat-Jet filter specifically to your needs.

Available versions

All filters in our selection can be found below. Is the filter you are looking for not listed? Please contact us, we will be happy to help and advise you about our possibilities. With years of experience with special designs, it is rare that we are unable to find a suitable solution.

Pat-Jet type 2/25

Flow rate – Fine dust	1.200 – 2.000 m3/h
Flow rate – Coarse dust	1.200 – 3.600 m3/h
Pressure	1,600 Pa – 4,000 Pa

Pat-Jet type 6/25

Flow rate – Fine dust	3.200 – 6.000 m3/h
Flow rate – Coarse dust	5.400 – 10.000 m3/h
Pressure	1,600 Pa – 4,000 Pa

Pat-Jet type 10/25

Flow rate – Fine dust	5.700 – 10.000 m3/h
Flow rate – Coarse dust	9.500 – 16.500 m3/h
Pressure	Pa – 8.000 Pa

Pat-Jet type 20/25

Flow rate – Fine dust	10.000 – 18.000 m3/h
Flow rate – Coarse dust	16.000 – 30.000 m3/h
Pressure	1.600 Pa – 8.000 Pa

Pat-Jet type 25+/25

Flow rate – Fine dust	10.000 – 80.000 m3/h
Flow rate – Coarse dust	34.000 – 135.000 m3/h
Pressure	To 8 kPa

Pat-Jet ATEX

Flow rate – Fine dust	3.000 – 80.000 m3/h
Flow rate – Coarse dust	3.000 – 135.000 m3/h
Pressure	1.000 Pa – 4.000 Pa

Are you looking for a solution to dust problems and thinking about a dedusting system? We are happy to take a look and can offer you customized no-obligation advice.